trev

Many thanks for all that info.i will get some on order and can start stripping the fuel rail out now. thanks again trev.

Yes that is the part number for the seals I'm going to need.my car is 1990 na. sorry for the delay answering.

hi all i'm replacing my injector rail and will need to replace the cushion seals.are these available in the U.K? thanks. Trev.

thanks for that information riccardo,new rubber hoses ordered.must have fallen out when i was rebuilding the engine thanks again i will let you know how i get on when said parts arrive. trev.

No, Nothing like that - maybe it's just me being paranoid after I replaced the head gasket and was convinced something must be wrong!! Nothing ever goes smoothly and I can't recall it doing this before.

hi folks. checked a mates 300zx today and after removing his oil cap his engine does not drop to a stall.so i think something is not right with my engine.any help would be great. trev.

:laugh::laugh:problem solved

hi folks Dont know if anyone can shed light on this problem.If i remove the oil cap when the engine is running the engine wants to stall.The car ticks over normally with the cap in place.I have cleaned and checked the pcv valves and all seems good.any help would be great. Cheers trev.

thanks everyone for your help and advice.rebuild now complete.car is now uo and running.dont think i would rebuild another one of these engines again though. nearly bit off more than i could chew.but with help off this club and lots of videos it was possible. thanks again trev

hi folks. andrew thanks for that information.looks like you have saved me a lot of time and money.should have asked the question on this site to start with.thanks again everone. hpoefully will have it back together soon. trev

hi folks next question.does anybody have a spare printle cap please? thanks trev

hi all where can i get the plastic end cover for the injector?.having problems getting a nissan injector didn't think i would have any chance of getting just the plastic part. cheers trev

Hi All I am looking for an injector rail for my 1990 300ZX NA. Managed to break the plastic tip off one of the injectors when stripping down and this is the only thing stopping me from rebuilding my engine. If anyone knows of where I can get hold of one, I would really appreciate it. Not sure if it is a 270cc or a 370cc rail, it's a standard 1990 import. cheers in advance best wishes Trev

Thanks Jimmer.It's off to buy lots of gaskets,water pumps,ect.Looks like i'm going to have to do a rebuild.Fun days ahead.

hi hope someone can help.i need to know if tt head gaskets are the same as non turbo head gaskets. thanks trev