xav2075

Its the 'tie rod ball joint'

Well one nut or bolt was bound to do a runner while i am working on the zed. Still getting better :rofl: What type of nut that secures the steering arm bolt to main wheel disc, suspension frame thingy.

Sorry can someone give an idiots guide to flicking that clip thing open so i can remove the frickin hose. And how to remove the double ended hose holder. I am a right plank doing some things.

Erm what a crows foot type socket. I have the spanners that are closed with teeth inside that only spin one way.

Plodding along with removing the subframe. At the moment i have bled the front brakes and need to disconnect the hoses from the wheel arch that go to the disc calipers. Looks like i should do it near the wheel arch. But i cant get the things off:- I have already unscrewed a clip from the wheel arch.

I have finally started unbolting stuff on the front suspension subframe to drop it so i can get to the passenger turbo to replace it (yes i know :wack: ). I am being a good lad and taking photos with phone and labelling bolts and stuff in clear bags. How do i unscrew the front shock absorbers at the top to drop them? They have a bolt with a straight shank on it at the end and a bolt screwed on it?

Where do i buy them from please for stock manual tub. I need one :)

Well to rewind. My zed has been sweet A ok really till last weekend when the passenger side turbo went pete tong. Before that i had the coolant bottle leak. I have not faffed about with any connectors until yesterday where i noticed the passenger side big black connector not connected but yet the drivers side one is. I am trying to see how i can fix it. Dont want to start one of those mud slinging contests :( The only zed meet i have been two is a xmas one at a Notts go kart track.

Zedworld. I have it booked in with them to have a look next week thursday.

Well it never was. I just had a look :shock: That is a big square rectanuglar connector. Not the oval ones that are a blue\grey colour.

Ah ok figures cos i have a Profec IIB. I shall just wait till my appointment at the garage. FFS.

Picking a straws i guess. Last night i found on the passenger side a black rectangular connector not connected. I wonder if this caused the waste gate to seize. How can i unseize it. And even if i did i wonder if the turbos are still buggered. Help me obi wan you have a zed too lol.

I am going to try and make this if i can fix the boost leak in time. I swear if you could tie all the tubing from a zed in a straight line it would go round the world 2 times ergh.

I did a DIY job (it actually worked :wack: ) using Mercedes HID lights connected to a modded headlamp shell. The HID ballast is tied with clips to pipe brackets.

.. the plot thickens. My mate dwarfy said that as my exhausts are not pooping any strange coloured smoke at all it is probably a hose that has come loose. Well i have had a look underneath and cant find anything not connected around the turbo area. But there is a load of stuff i just cant get to. And on the passenger side there is a rectangular black electrical connector that was unplugged (not like the more oval bluey grey ones). On the drivers side this connector is matched with the socket. I shall go checkout a guide for boost leaks. Who is the fool, the fool or the fool that follows him :xxx: