turb0z

me! :hyper: but i'll meet ya there ;) :rofl:

Thats ok if you can pull the engine yourself. If left to a garage the $500 wont go far towards a £1k pull/refit. Glad your happy with the result anyway mate :)

Get well soon vinz and take it easy mate.

Sort it out graham ;) :duffer:

And these are the setting I used LO - Set 36%, Gain 29%, Set Gain 75, Warn 150, L 0 HI - Set 45%, Gain 30%, Set Gain 108, Warn 166, L 0 Lo = 15psi Hi = 17psi so be careful Its also worth saying that all cars are different so build up the boost slowly and keep an eye on the pressure. Listen for dett too whilst trying these settings

Try this dan http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=920063&words=profec

Happy Birthday! Have a good one Lee :duffer:

Engine has never been out so it will still be nissan OE spec hoses and clips. Is it likely to be the clip thats failed and not the hose itself? Hope to have a better look at the weekend.

anyone know the diameter and length of the pipe? my as well replace it with silicone seeing as i'm there. Pete

ok cheers pete.

I've noticed over the last few months that I am not boosting as high as normal and I can hear air whooshing when under boost. So I did a boost leak check and this is where its coming from. Anyone know how on earth Im gonna get to it?? Also what size it? I presume I can replace it with silicone hose?

If you look in the procedure, step 1 is remove engine. there is a link there ;)

Check your power steering fluid level mate. Thats the usual culprit.

I didnt mention raid 5 & 1+0 because he's only got 2 drives :)

In theory they will be twice as fast in a RAID 0 configuration because you have twice as many heads, read/write buffer etc. However, I think the data bus on your MOBO will be the bottle neck. Also the way data is written to the drives (striped) means that as one block of data has finished reading from the drive the second drive is prep'd ready to read the next block. If you are installing your OS onto the array then i would suggest RAID 0. If you need loads of storage then I would suggest RAID 0 or leave them seperate. If you have really important data and dont want to loose it the RAID 1 is for you. Hope this helps chris.

Basically RAID 0 (stripe) will give you 1TB of HDD space and is good for speed. RAID 1 (mirror) will give you 500Gb of HDD space and is good if one of the drives was to go faulty. RAID 0 is definately faster mate + the advantage of the extra storage. Only problem is that if 1 of the 2 HDD fail in the array you will loose all data! You can partition the drive AFTER you have built the RAID Array. Pete

:rofl:

fixed ;)

bump

bump

Have a good one mate :duffer:

nice one pete

ok I dont know the N.Wales area too well so can someone suggest a nice location?

Its definately not the fuel pump. I know what that sounds like and this gets noisier until around 65mph and then gets quieter. I cant think of owt to say to these Joel so i'll just give ya this :slap: :rofl:

No its all the time dave