Jalfrezitogo

Hi, I'm looking for a Windscreen Wiper Linkage for my 1993 manual TT. Has anyone got one for sale please? Thanks Andy

Hi I'm looking for the ali pipe connecting the A/C condenser to receiver/drier. It's the little connector that if it's anything like mine is rusted on solid and had to be cut off. If you have one that would be great. None in stock at Z1Motorsports or Conceptzperformance Thanks Andy

As the title says I'm looking for a window regulator for the driver's side window. Mine's a 93 TT but don't think that makes a difference. Thank you

After all that it was the radiator cross member so the link from Alic at the start of this thread is most helpful. Think I will get a new one shipped in, too important not to. Thanks

Thanks for the suggestions and offer. I have just picked one off ebay from a good source (it seems) for £55 delivered so quite chuffed. Will strip, check and re-coat as suggested. Looks like some job to get it in though, I assume the garage can do it from the bottom up?

Thanks Think I had the wrong part number. Price.... Ouch looks like another 4 figure MOT bill.

Certainly won't be doing myself (I'm bloody useless!) It's the suspension cross members I need.not the central radiator one. Thanks anyway.

That dreaded time of the year the MOT. Usual carnage...............2 new tyres (that's now 4 new ones), window regulator for E/W and a whole heap of welding.....but also some discontinued parts Does anyone know if there is anywhere in the world that does the suspension cross members (Part 54401-44P20) Nothing at ConceptZ or Courtesypart (which is usually the last resort). Will i have to get these of a breaker? Cheers Andy

As I successfully secured some oil cooler hard-pipes I'll have a punt on a fuel pump. I need a fuel pump, mine very noisy, for a 1993 Twin Turbo manual. UK car if that makes a difference. Newer the better please. Andy

Hello, I need a set of these pipes. Parts number 2135540p11. Item 21302 on most parts diagrams. Anyone with a set? Thanks Andy

Thanks I'll check that too.

Thanks for the codes tip. I'll take that in to the guys at the garage and see if they have tried that. The MAF was bought from Z1. I thought it would be that as I had a problem with a MAF a few years back with a similar problem. So as I thought that would fix the problem I decided to upgrade at the same time so I upgraded to the dual set up (cost a bloody fortune with the extra filters, Selin translator, import duties and tax) but it wasn't the cause. Thanks

Garage did it and they are very thorough. I was putting some polished bits in at the same time Plenum, turbo pipes. etc. so everything got a good a good clean. Any connectors that might be a particular problem? Thanks

I wondered if anyone has any suggestions. Car sitting in the garage (and has been for some time) and they're not sure where to go next. We going on a rolling road this week to see if we can identify the fault. When car is driven it won't rev above 3000rpm in all gears so pulling away is a nightmare. You can rev in like mad when in neutral. I replaced all the injectors and the car was working fine. I have changed the entire engine wiring loom so all the connectors actually connect. 3 of the 6 coil packs have been replaced with new I have a new MAF so it's not that Just before the problem started I was driving throttling down and something went pop like a muffled exhaust backfired. The garage found a split in the exhaust manifold/flange (think that what it was) that's now been repaired but the problem persists. Any suggestions would be appreciated. Andy

Thank you Guys for the birthday wishes and car compliments (makes it all worth while). I do need to circulate more.