James Funge

Sorry guys couldnt connect to forum ??? I think your right it must be a small air leak, i havent noticed any drop in performance. i just hope im not doin any damage to the car. thanks for your help guys

bump urgent

any vac lines running of the plenum will be fine mate and it doesnt make any difference but i think the size is 4mm hose but 5mm will be ok. just use a fuel line about £1 per metre. Good luck

I have just fitted blitz bov's in place of my old re-circs and everything was going fine but the drivers side has started to whistle??? i have checked all the connections and cant see whether its the turbo or the dump valve and i am at a loss as to what it could be ? Any coments or help would be really appriciated. thanks

bump

its not damn one sound like that but the other is not where should i run the vac line from ? currently i have used the old vac line from the re-circ is this good and will a bit of oil do the trick.. thanks again guys i dont know what i would do without this forum (prob walk to work !)

Has anyone got these fitted ? I fitted mine last night and not sure if they are working properly. I have backed the adj screw all the way out. One is making a ssssshhhhhh sound and the other sounds like an external wastegate is one of them sticking and if so will wd40 help or what do i do. Thanks again Guys

thanks again mate nothing is ever easy lol

Thanks mate i have fitted one to those pipes and i wondered why it wasn't working lol (will i be damaging anything ? ?

I wondered if anyone could help with a quick question. Which pipes do i block off the ones that look like their going back to the engine or the ones that are behind the headlights.. Thanks

Sorry couldnt make it (my car is not a boat). Up for the next one weather permiting

Thanks again guys, Topless let me know if you get it working, it would be really helpful cheers

Thanks guys, I might take one of you up if thats ok, hopefully i can find someone close to home but if not will give you a shout. thanks again

Hi Guys, Is there anyone around my area who would be prepared to spare 30 mins of their time so i can hook up to a consult and see if my o2 sensors are Kaput. I will bring lots of beer... Thanks

Hi Guys i have looked through the archive and cant find a comprihensive fitting guide for blitz bov's. Do i need a fitting kit (im not mounting on the hard pipes) Thanks and sorry if im being a dumb ass

6.5 turns

because of the design of the wheels 10mm fit on with enough lenth on the stud no problem. thanks

Thanks for all you comments guys much appriciated, as for the spacers the front do NOT need stud extentions the nuts have around 6 .5 turns on them which is well enough. They are the ones on ebay Gumball. Thanks again guys !

thanks dude

I got them from ebay 8j front 9.5j rear needed 10m spacers on the front and 3m on the back to clear the calipers. £500 not bad huh. What do ya reckon

Def white spirit Works a Treat

cool what do you need please pm me thanks

Hi would someone kindly change my name from tomevo to james funge ? Is this possible ? Thanks

Thanks mate, i didnt know about the leak until yesterday, thanks for the advise but i changed my pcv valves about 4 months ago. Crank seal to be done on tuesday, the saga continues !!!

I would be interested