Have just changed my alternator. Filled up with water and so on. Connected the battery. Flat battery So had another car and hooked up the wires from each car. Did hook up ground first and the + last on my Z. Got a small spark. But instanly as I had hooked up the + there was smoke around the battery. Checked the fusible link. The only weird thing I could find was that the fuse to the left with the wire smelled burned....

 

Everything is black when I turn the key in the ignition. Only thing that work is the main beams. But that is also wrong since it should be normal driving lights when lights is turned on. Other than that everything is BLACK:(

 

Any ideas on where to start.. want my baby back on the road again...

In case I've done something wrong with the amp connections..

 

There are 3 wires to connect.

 

One black that is ground and is mountet to the amp with an 8mm.

 

Another black from the sylinder formed thing that was mountet on the amp that goes to the battery connection (regulator maybe??)

 

The last that runs together with the plug to the amp. That one also goes to the battery connection on the amp.

Not sure from your description, but if you want to give me a call I can talk you through a few checks +447801 735117

 

Cheers,

 

Andy