Parts for my 60k service arrived this mornin, guess this means I'll have to start tearin her apart soon, couple more bits need first tho, Rad pipe set From Danny and Pulley set from smithy, and then OUT WITH THE SPANNERS. Where's Daz(mantaV8) when I need him lol

 

One you'll defo need, unless you already have it ;) , is a 27mm socket to get the main pulley off. These are available from Halfords off the shelf.

 

HTH, and wish you luck.

One you'll defo need, unless you already have it ;) , is a 27mm socket to get the main pulley off. These are available from Halfords off the shelf.

 

HTH, and wish you luck.

 

 

 

cheers for the heads up there matey

will defo get one

 

;)

If you want to have a quick read through the first few sections of My Journal, then it's what I noted as I was doing mine last winter.

It's not an in-depth report, but just some bits and bobs, might be of interest to you.

Didnt you get the 2 metal things that the 2 water hoses above the water pump go on, as they always corrode!!!

 

Looking good thou bud, i'll be ordering lots of stuff like that in the very close future! :D

 

Good luck with doing it bud

nope not yet chunk, what they called and where from??

If you want to have a quick read through the first few sections of My Journal, then it's what I noted as I was doing mine last winter.

It's not an in-depth report, but just some bits and bobs, might be of interest to you.

Cheers mate, will defo have a look ;)

I'm changing my number!! :rolleyes: :tongue:

I'm changing my number!! :rolleyes: :tongue:

 

 

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

 

Just get ya engine in and get ya arse up here ;)