I'm after the link to the site that does the Download Speed checking, that was posted on here a while ago. I've been looking and just can't find it anywhere.

I've checked out some other ones on-line, but they give the result as one figure, where-as this other one showed you both the Download and Upload separatley (if you see what i mean ;) )

 

TIA

http://www.bandwidthplace.com/speedtest/ Not that fast though depending on where you live..

or there is beeline bandwidth test

http://www.beelinebandwidthtest.com/

 

found it quite good

http://www.bandwidthplace.com/speedtest/ Not that fast though depending on where you live..

 

910.8 kilobits per second

 

Thanks Ken for that, that wasn't the one I was looking for, but it shows that I'm getting about what I'm suppose to be getting :D

or there is beeline bandwidth test

http://www.beelinebandwidthtest.com/

 

found it quite good

 

912Kbps

 

Yep, about the same, cheers mate :D

 

 

I'm a happy bunny now ;)

798.5 and i thought it was running slow

767.6 Im fairly happy with that!! :)

mine between 500-600 supposed to be 1mb line gurr i hate ntl

Mine is only 394

goto http://www.broadbandreports.com

 

theres a tweak test you can do, and then enter your system cpu etc and line spped and it will give you settings to enter into a program you can get from there called drtcp, with this you can spped things up a bit, my adsl connects at 2.8 mb on a 2 mb line now

 

http://www.broadbandreports.com/tweaks

 

my old report

 

1. Your Tweakable Settings:

Receive Window (RWIN): 17520

Window Scaling: off

Path MTU Discovery: ON

RFC1323 Window Scaling: OFF

RFC1323 Time Stamping: OFF

Selective Acks: ON

MSS requested: 1460

TTL: unknown

TTL remaining: 109

 

2. Test 146000 byte download

Actual data bytes sent: 146000

Actual data packets: 100

Max packet sent (MTU): 1500

Max packet recd (MTU): 1500

Retransmitted data packets: 0

sacks you sent: 0

pushed data pkts: 15

data transmit time: 1.149 secs

our max idletime: 146.3 ms

transfer rate: 83205 bytes/sec

transfer rate: 665 kbits/sec

This is not a speed test!

transfer efficiency: 100%

goto http://www.broadbandreports.com

 

theres a tweak test you can do, and then enter your system cpu etc and line spped and it will give you settings to enter into a program you can get from there called drtcp, with this you can spped things up a bit, my adsl connects at 2.8 mb on a 2 mb line now

 

http://www.broadbandreports.com/tweaks

 

my old report

 

1. Your Tweakable Settings:

Receive Window (RWIN): 17520

Window Scaling: off

Path MTU Discovery: ON

RFC1323 Window Scaling: OFF

RFC1323 Time Stamping: OFF

Selective Acks: ON

MSS requested: 1460

TTL: unknown

TTL remaining: 109

 

2. Test 146000 byte download

Actual data bytes sent: 146000

Actual data packets: 100

Max packet sent (MTU): 1500

Max packet recd (MTU): 1500

Retransmitted data packets: 0

sacks you sent: 0

pushed data pkts: 15

data transmit time: 1.149 secs

our max idletime: 146.3 ms

transfer rate: 83205 bytes/sec

transfer rate: 665 kbits/sec

This is not a speed test!

transfer efficiency: 100%

Did the above and got this: Service: isdndslcablewirelesssatellite Speed (advertised) kbit/s: Operating System: win95win98win98SEwinMEwinNTwin2kwinXPMacLinuxFBSDSolaris Connection: normalwinpoetwinXPpppoerouterpppoeraspppoeenternetpppoA

 

 

 

1. Your Tweakable Settings:

Receive Window (RWIN): 17520

Window Scaling: off

Path MTU Discovery: ON

RFC1323 Window Scaling: OFF

RFC1323 Time Stamping: OFF

Selective Acks: ON

MSS requested: 1460

TTL: unknown

TTL remaining: 111

 

2. Test 146000 byte download

Actual data bytes sent: 147460

Actual data packets: 101

Max packet sent (MTU): 1500

Max packet recd (MTU): 1500

Retransmitted data packets: 1

sacks you sent: 11

pushed data pkts: 15

data transmit time: 2.886 secs

our max idletime: 218.6 ms

transfer rate: 41795 bytes/sec

transfer rate: 334 kbits/sec

This is not a speed test!

transfer efficiency: 99%

 

 

3. ICMP (ping) check

Target unpingable

 

 

 

 

Notes and recommendations:

Choose RWIN between 5840 and 10220 (FAQ #586)

download/use DRTCP .. (FAQ #578)

Read the tweak FAQ

 

Notes and recommendations:

Good data stream (no/few rexmits)

 

Notes and recommendations:

Become pingable

if you need basic packet loss tests done

Check tweak FAQ

 

Now what??

goto http://www.broadbandreports.com

 

theres a tweak test you can do, and then enter your system cpu etc and line spped and it will give you settings to enter into a program you can get from there called drtcp, with this you can spped things up a bit, my adsl connects at 2.8 mb on a 2 mb line now

 

http://www.broadbandreports.com/tweaks

 

.....

Just installed that, and run it, re-booted, and it's made NO diference what-so-ever :D

And another :-

http://www.adslguide.org.uk/tools/speedtest.asp

This any good????

 

 

 

Receive Window (RWIN): 17520

Window Scaling: off

Path MTU Discovery: ON

RFC1323 Window Scaling: OFF

RFC1323 Time Stamping: OFF

Selective Acks: ON

MSS requested: 1460

TTL:

(less any hops behind firewall)

132

TTL remaining: 118

2. Test 146000 byte download

Actual data bytes sent: 146000

Actual data packets: 100

Max packet sent (MTU): 1500

Max packet recd (MTU): 1500

Retransmitted data packets: 0

sacks you sent: 0

pushed data pkts: 15

data transmit time: 1.013 secs

our max idletime: 96.8 ms

transfer rate: 100712 bytes/sec

transfer rate: 805 kbits/sec

This is not a speed test!

transfer efficiency: 100%

 

:confused: :confused: :confused:

I got 253 K/s - 2024 Kbps... no idea what that is but I got a smiley face. So that was cool. :D

anyone else on Blueyonder 4meg

Iam on Blueyonder 1mb

I got 972Kbps on one test and a transfer efficiency of 99% on one of the others

I'm happy :D

And another :-

http://www.adslguide.org.uk/tools/speedtest.asp

Thats the one I was looking for :D cheers Andy

And it shows around the same area as the others, so my connection seems to be working properly again :hyper:

well the first section is a settings list for you to enter into drtcp. when entered restart the pc, also remember that you can set the RWIN number to higher setting this will speed things up however dont over do it or you will suffer from data stuttering as it will not process fast enough