just a question for a mate. any1 know what boost these can be safely taken to without anything going pop cheers :cool:

Rev 1 and 2 up to a bar.

Rev 3+ around 1.2 iirc.

Try here http://www.imoc.co.uk

 

Right I'm off before Mark takes this reply as an insult to the honour of 300zx owners everywhere lmfao!!

Rev 1 and 2 up to a bar.

Rev 3+ around 1.2 iirc.

Try here http://www.imoc.co.uk

 

Right I'm off before Mark takes this reply as an insult to the honour of 300zx owners everywhere lmfao!!

 

wats 1.2iirc mate

They'll run about 17psi without too many problems. Although, I understand that overspinning the turbo is a risk !

wats 1.2iirc mate

 

1.2 bar If I Recall Correctly

They'll run about 17psi without too many problems. Although, I understand that overspinning the turbo is a risk !

 

A pre 94 car wont support much over a bar past 5k rpm on the stock turbo, boost will just drop down again

wat do they run standard?

Rev 1 and 2 (pre 94) .7 bar/ 10psi

Rev 3+ (94 on) .9 bar/ 13psi

mates is a k reg has bigger turbo on but ain't got a clue what type

probably best to keep it round 1 bar then. Rev 2's only have 440cc injectors, and a bigger turbo will be stuffing in a lot more air at 1 bar, than the stock ct26.

cheers