these chips for sale on ebay,any good ? or can someone recommend

something else?

cheers, Clive

 

 

mates cossy has over 350 so need a bit more poke ;)

wrecked his rear axle though :xxx:

thats sorted that then :)

think i will leave it (ebay)

cheers everyone

soz baggins, not sure of jet size. are they something like 1 - 1.2mm? just got six little bronze things in a bag!

soz baggins, not sure of jet size. are they something like 1 - 1.2mm? just got six little bronze things in a bag!

 

OK well I would think that you have 2 x 0.8 , 1.0 , and 1.2 , are there any markings on there ???? if they are different what ever you do make sure that you end up with two the same size i.e not a 1.0 and a 1.2 in each pipe , if that makes sense :)

 

Ryan

BAGGINGS:

 

Is it possible to get a chip for z31 non-turbo `84 ?

 

Thanks

 

TBH mate i don't know enough about the Z31 to comment but I would have thought so

 

Ryan

OK well I would think that you have 2 x 0.8 , 1.0 , and 1.2 , are there any markings on there ???? if they are different what ever you do make sure that you end up with two the same size i.e not a 1.0 and a 1.2 in each pipe , if that makes sense :)

 

Ryan

 

TBH i've no idea what went in - i didnt even know how many go in the engine :confused: (master mechanic here!) but i got four back from Jeff - they all look used, well at least two of them do. They say, 1-0.040 (x2) and 0.6 (x2). Does this mean anything to you???

TBH i've no idea what went in - i didnt even know how many go in the engine :confused: (master mechanic here!) but i got four back from Jeff - they all look used, well at least two of them do. They say, 1-0.040 (x2) and 0.6 (x2). Does this mean anything to you???

 

Yea do not use the 0.6 they are to small use the 1.0 which should give you around 13psi

 

Ryan

A bit OT bit what bhp rough guess do you think im running?

 

15psi boost, se chip, blitz induction, 3" zorst from downpipe to back with no cats etc?

 

I guessed 350 at fly?

 

me

A bit OT bit what bhp rough guess do you think im running?

 

15psi boost, se chip, blitz induction, 3" zorst from downpipe to back with no cats etc? I guessed 350 at fly? me

Steve-O no 2 cars are the same mate the only real way to find out is to get her on a Dyno.... :cool: you cant really guess figures.

A bit OT bit what bhp rough guess do you think im running?

 

15psi boost, se chip, blitz induction, 3" zorst from downpipe to back with no cats etc?

 

I guessed 350 at fly?

 

me

 

well I was running the same as you but with apexi induction and 14.5 psi and I got 342RWHP, at 16 psi I was hitting 356RWHP (which they estimate at 430BHP at the fly).

 

As mentioned earlier in this thread it totally depends on the state of your engine and tubs.

just for reference, i get 16psi with 1mm tips, 1.2mm gave me 12psi

so the smaller the tips the bigger the boost? ive got myself an aftermarket gauge to cope with the bigger boost but not been fitted yet!

just for reference, i get 16psi with 1mm tips, 1.2mm gave me 12psi

 

That is really weird Paul every car I set up with 1mm jets gives 13-13.5psi and with 0.8's 15-15.5 psi , yours are defo 1mm ???

 

I know all cars are slightly different because of leaks etc , but that is a big difference

 

Ryan

That is really weird Paul every car I set up with 1mm jets gives 13-13.5psi and with 0.8's 15-15.5 psi , yours are defo 1mm ???

 

I know all cars are slightly different because of leaks etc , but that is a big difference

 

Ryan

 

yup, deffo 1.0mm. tried 1.2 1st, took them out (still in the top of my toolbox) & fitted the 1.0mm ones