Thinking of getting a leather trim kit from Luke!

 

And am in a bit of a dilema!

 

1...... Do i replace the leather on my seats which apart from the drivers side lumber which is scratched r fine with a kit from Luke or..........

 

2.......Sale/part exchange my set with a cloth set!! and re cover them!!

 

what would u lot do

 

cheers

Dave

 

ps any body tried to fit kit themselves

i am also interested in one of these kits from luke so would appreciate any info on ease/difficulty of fitting yourself

cheers ..lee

I fitted my interior from look myself, it took two weeks every evening. Quite hard work especially doing the seats but well worth it.

Geoff.

This is what I would do, and probably, eventually will end up doing, which is.........buy a cloth set which I expect is only a couple hundred £££ for the lot, get them releathered and then sell the ones I have.

 

Minimum loss that way and another set of original Z leather seats don't go to waste.

If a few of you want these leather kits from Luke,I can ask him to get a group buy going will be even cheaper for you;)

im not ready to buy one of these kits yet as i am about to have the exterior done but would be very interested in a group buy in the future.

 

geoff, did you actually have to do any stitching when fitting your leather kit

 

cheers ...lee

Cos that is wot i have been thinking so i am on the lookout for series 2 cloth seats front & rear

cheers

Dave

 

ps the car will b off the road end of sept 4 the winter so will advertise seats then ;)

I have one of these kits from Luke and the quality is excellent but it really is only as good as the fitter .

 

I had a local guy do mine cost £200 and he did do a puker job

did you have the full kit including doorcards dash etc. i am only down the road from you so when i get round to getting my kit maybe you could give me the details of the man who fitted yours.

 

cheers ...lee

How much are the leather kits??

 

Cheers

Kirbz

http://www.zcentre.co.uk/interior/leather.shtml

After looking at the pics of lack300's interior i phones up a few companies who do car trimming and for any leather, piped, two tone etc including all the seats, door cards, dash and centre i was quoted £980 which i didnt think was bad and i'm not technical enough to do it my self :)

 

If in doubt pay someone

 

Kirbz

No Lee, there is no stitching involved in Luke's kit, everything is prepared for fitting.

Geoff.

Originally posted by LEEZX

did you have the full kit including doorcards dash etc. i am only down the road from you so when i get round to getting my kit maybe you could give me the details of the man who fitted yours.

 

cheers ...lee

 

Lee

 

No worries mate , I already had the sits covered , what my guy did was the rest of the interior and the bit above the dash clocks , also replaced the PVC on the targa's in the same colour

 

Ryan

hi ryan, what colour is your zed mate. im quite often in newbury i'll keep a look out.

cheers ..lee

Originally posted by LEEZX

hi ryan, what colour is your zed mate. im quite often in newbury i'll keep a look out.

cheers ..lee

 

Need you ask mate :rolleyes: Silver of course :D what about you

Originally posted by bagins

Need you ask mate :rolleyes: Silver of course :D what about you

 

its black mate. im having the wide arch conversion done in october and it was supposed to be going lamborghini orange but finances have taken a hit recently so sticking with black for now. at least i can still afford the kit.

 

cheers ..lee

Originally posted by LEEZX

its black mate. im having the wide arch conversion done in october and it was supposed to be going lamborghini orange but finances have taken a hit recently so sticking with black for now. at least i can still afford the kit.

 

cheers ..lee

 

You will have to post some pics when its done , Nice to see another fellow MINES user;) :cool:

Originally posted by bagins

You will have to post some pics when its done , Nice to see another fellow MINES user;) :cool:

 

i am sending my cheque off this week to subscribe so hopefully will be posting pics when done. i still havent still felt the full benefits of my mines ecu as im still running stock filters at 14psi, what induction kit are you using?

Originally posted by LEEZX

i am sending my cheque off this week to subscribe so hopefully will be posting pics when done. i still havent still felt the full benefits of my mines ecu as im still running stock filters at 14psi, what induction kit are you using?

 

At the moment I have a Green Filter but will be changing that to twin apexi's very soon , The green filter seems to work well though , the only downside I have noticed with the MINES is that you have to fill up with Optimax or turn the boost right down:(

Originally posted by bagins

At the moment I have a Green Filter but will be changing that to twin apexi's very soon , The green filter seems to work well though , the only downside I have noticed with the MINES is that you have to fill up with Optimax or turn the boost right down:(

 

ive only ever used optimax so wouldnt know. did you get detonation? twin apexi's? dont you need some sort of ecu reprogramme as you only have one maf sensor?

I'm still doing my homework on the various options but I think that's the route I will take