Hey guys, what combination or what parts can I use to make up a SWB manual propshaft?? Are there any other Nissans (Terrano etc) that might share propshafts with the Zed??

Use front half from any manual, and use a rear swb tt prop.

 

Or just get a one piece prop made up

Hi Alic, I don't have a propshaft at all, it was stripped off the car with the gearbox, diff etc was hoping that an auto front half with a manual rear half might do the trick? If I got the two correct pieces, I could always send them off to get made into a one piece:thumbup1:

I think the auto box is a different length to a manual one so the front half will be different. If the splines of the auto/manual are the same then you could use an auto one to get a one piece made up.

 

It doesn't matter about the rear half as long as it is swb tt. If you have one piece made up a lwb TT will be fine also.

 

 

Hope that was alright to understand.

So if two piece : manual front & swb tt rear

 

One piece: any prop with a TT rear flange,

(as long as the auto splines are the same, which I cannot confirm if they are)

Hi Alic, I don't have a propshaft at all, it was stripped off the car with the gearbox, diff etc was hoping that an auto front half with a manual rear half might do the trick? If I got the two correct pieces, I could always send them off to get made into a one piece:thumbup1:

 

The auto and manual fitments into the gearbox are different, Richie. Simplest thing for you to do is tell Jimmer what you need and he can get a one-piece prop made up for you. :thumbup1:

 

Or speak to JimboSmythe on here as he may have a spare - he bought my OEM prop from me and I don't think he needed it in the end.

The splines on both gearboxes are the same, its just that the auto box prop has a cowell fitted which is easily removed. So get any front end and any rear and a one piece is the way forward. Jimmer has the dimensions for all models.