Genuine Consult on e-bay now.

Followers

October 6, 201312 yr

As title e-bay item no: 171140046354 could be useful for you budding mech types !! nice addition to your toolbox for sure but be quick auction up at 8:40pm (ish)

Jeff TT

$T2eC16R,!zoE9s5ne3jsBSSyQ!47CQ~~60_58.JPG

$(KGrHqFHJEQFJGC5nmP9BSSyPquypg~~60_58.JPG

Quote

Replies 79
Views 8.7k
Created 12 yr12 yr
Last Reply 6 yr6 yr

Popular Days

February 10, 201510 yr

I have dibs on this

Membership No 0780

INSURANCE GOOFA

Datascan, Conzult, ECUTalk and a few others

I have all the rare bits you can't find :tongue::tongue:

Quote

1 year later...

March 4, 20169 yr

hi im Mario from Germany i have had the same Problem i got two consult 1 without function only error 200 so i figured out why they don t work

the only Thing that could be damaged is the capacitor

in the consult 1 are five of them i changed all five on both consult s

than i press the 2 upper Corners and hold the on button and ...

inisialized by Card ?

this means ... yes it worked

then press Y and the consult load

both consult are working this is great :yes:

Quote

3 years later...

July 18, 20196 yr

Hello from Australia. I just wanted to post a major thanks for the information contained/shared in this thread. I got linked here from a random German forum while looking for information on my recently acquired Consult 1 unit.

The information here here has so far been amazing to help get it running. Still needs the internal battery replaced but that will happen soon. Thank you.

I have one question regarding the program cards and what/how they relate to what models are supported etc. My unit originated from New Zealand has an AE950 card installed. I’m a Pulsar/Primera guy personally. Thanks once again.

Quote

July 18, 20196 yr

Welcome to the club Simon and hope you find the answers you are after :thumbup1:

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

Followers

Go to topic listing

No registered users viewing this page.

Replies 79
Views 8.7k
Created 12 yr12 yr
Last Reply 6 yr6 yr

Popular Days

No registered users viewing this page.

Check engine light comes on and off sporadic.

Those codes are all pointing at a related issue. A/F ratio falling out of range, heater elements within the O2's out of temp range, EGR sensor or exhaust gas temp falling out of range, etc. There is a few areas to consider...
Was any work recently done to the car that may have triggered this? When was the last time you replaced the O2 sensors? Check the O2 connectors and wiring to make sure one of them hasn't contacted the exhaust or melted. Any exhaust leaks especially before the cats? When was the last time you performed an induction service and cleaned the intake, TBs, IAC, etc? The EGR and IACV love to get carbon buildup over the years and can affect flow, similarly can happen to the vac lines to the factory wastegate control solenoid. You mentioned the car felt like it was still running well, so no idle RPM fumbling, hanging, stumbling, etc? Are you running an aftermarket boost control solenoid or OEM? Sorry for the load of questions, but need a bit more to go off of to help point you in the right direction.
Even though the vehicle has considerable low mileage, it's still 30 years old. If it's kept in a garage it tends to handle the elements better than sitting out in the external environmental conditions and will need more routine maintenance and care regardless if it's being driven or not. (i.e. 60K / 120k maint w/ timing belt)

By protoj · 21 hours ago21 hr
JaiKai - MK2 - Ziggy Build

Time to clean the AC parts as i found a birds nest in it.

By JaiKai · Yesterday at 12:041 day
Check engine light comes on and off sporadic.

Hello, I have a 1996 twin turbo manual with 64k miles. I recently started having the check engine light come on sometimes and other times it doesn't. When I checked the codes these are what I got : If anyone has had these same codes what did they change to fix the problem. Car runs fine with check engine light on but want to fix issue. Any help would be greatly appreciated. Thank you.
P0400
P0136
P1150
P1155

By JB300ZXTT · Monday at 22:141 day
UK Importers Advice

Thanks for the recommendations, few different places recommended Gorilla so I will get in touch with them.

By CarmageddonTheMusical · Sunday at 13:333 days
Reverse switch problem

Me again.
Reverse lights don’t work. Checked the bulbs and the fuse by the drivers pedal, all seem fine.
So I assume it’s the reverse switch. I’ve bought a spare and tried to swap it today. What a pain that is! I failed.

So I have two questions:
Is this possible without dropping the gearbox?
I wanted to test it was definitely the switch before I went crazy getting it out, so unplugged the old one and plugged the new one in, put car in reverse and switched on ignition and then pressed the end of the switch in but it still didn’t turn the lights on. Does the switch work this way? That you can push the plunger end in and it should turn on?

By RobHowl · Saturday at 21:213 days

Sign In

Genuine Consult on e-bay now.

Top Posters In This Topic

Popular Days

Featured Replies

Join the conversation

Recently Browsing 0

Top Posters In This Topic

Popular Days

Recently Browsing 0

Popular Posts

Check engine light comes on and off sporadic.

JaiKai - MK2 - Ziggy Build

Check engine light comes on and off sporadic.

UK Importers Advice

Reverse switch problem

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)