Hi All,

 

Met up with a couple of you recently at time Attack, and thought you might be intereted in this build on here ? Let me know if not :)

 

Its a time Attack Car...

 

Hi All,

 

The exciting part has now happened, that we all love ! Dyno time !

 

We have put huge amount of detailed info on the blog which you can read at the below, with Videos !

 

PROJECT MOFF - Time for the Dyno and mapping

 

Abbey Motorsport have been busy....

 

New 800cc injectors

 

Link G4 with many additional sensors

 

We managed 653 BHP at the Rear Hubs, yay ! :)

 

 

 

 

PROJECT MOFF - Time for the Dyno and mapping

 

:)

Am I right in reading 2024 ftlb of torque?

Am I right in reading 2024 ftlb of torque?

 

No, that would be insane ! :)

 

Need to divide it by diff ratio of 4.111. Just under 500lb/ft

Who did the mapping bud?

Who did the mapping bud?

 

Its always done at Abbey motorsport

Ah right, I did read that name off the Dyno sheet but didn't realise they actually mapped cars as well. Do you know if they have ever mapped a Z32 out of interest?

Ah right, I did read that name off the Dyno sheet but didn't realise they actually mapped cars as well. Do you know if they have ever mapped a Z32 out of interest?

 

They have a large range of cars. I would imagine it is more the ECU which dictates if they will map or not ! :) Tell Mark or Scott you saw this thread when calling ! :)

Hi All, hope you are having a good Easter !

 

We have updated the Spec list. Its a bit long now, take a look, any questions, let me know :)

 

Link is here - Project Moff - Spec List Update

 

Happy Reading

Hey All,

 

Some details from our Recent track day at Silverstone F1 :)

 

Click to read the full story on our Blog - Track Day at Silverstone

 

 

 

Quick You Tube Clip -

 

Click to read the full story on our Blog - Track Day at Silverstone

Hi All,

 

We have been busy with having a completely custom stainless steel exhaust made up.

 

 

 

We even got the car back on the Dyno to see the differences the exhaust made and had to give some fibreglassing a go

 

 

 

Read the full story on The Project Moff Race Car Blog - New Custom made Stainless Exhaust System

 

 

Love to hear your feedback and opinions

 

 

 

.

Sorry for the delay all, more updates coming soon :)

Hi All,

 

Fantastic trip to the Nurburg Ring for a track day. 4 day trip over there, with both the Stagea and Project Moff.

 

See the video of our 180MPH we managed to hit on the straight, on LOW BOOST !

 

Read the full article about the trip on the Project Moff Blog - Nurburgring Track day with Circuit days

 

 

 

 

We'll next be at Cadwell Park on Tuesday 31st October

 

 

 

 

 

Love to hear your feedback and opinions

 

Nice Lobster backing...

I was mighty impressed !

Its been a while, but a new update it coming soon :)

 

Hope we all had a good Xmas ?

NEW HEATED WINDSCREEN AND ROLL CAGE GUSSETS

 

Read the full story on the The Project Moff Blog

 

 

Sometimes the simple things catch you out ! When you have bonnet pins, make sure they are down before setting off ! Luckily we had finished racing around the track for the day. As you can see from the photos below, it has caused quite some damage !

 

 

Bonnet pins broken, all the bonnet bracing cracked, bonnet corners broken, and the windscreen is cracked !

 

 

 

 

 

New heated front windscreen fitted. One question which will probably be asked is 'what external trim did you use?'. We have just used a universal one. Some say they don't fit, some say they do. We are in the 'they do' camp. We did have an experienced fitter, maybe that can be the difference !?

 

 

 

NEW HEATED WINDSCREEN AND ROLL CAGE GUSSETS

 

Read the full story on the The Project Moff Blog