i have always had a intermitant speedo it works fine then it will just stop and then at some point just come back on any ideas and where - how to fix ??

 

thanks

mark

hi mark

 

at a minimum you need to take the dash ( gauges assembley apart ) there is a how to on here somewhere, do a search for it ....most probably a loose connection on the back of the speedo ...or it could be something as simple as the needle catching on the speedo dial face , it doesnt take much to stop it working

Usually a dry solder joint on the PCB (circuit board) on the back of the speedo, or a duff MPH-KPH converter, but as said, I would take out the clocks, easy enough to do, and go over the solder joints, and also as said, I'm sure there is a how-to floating around matey...

http://pexcom.com.au/z32cms/e107_plugins/content/content.php?content.321