Hi im in need of some help here before i buy.

 

The wheels i want only come in a 9.5 and a 10!

 

I want to fit a 9.5 on the front and a 10 on the rear.

 

My choices of offset for the front is either et12 or et25.

 

Im going to have the arches rolled, Would it be best to go with either a et25 and hope the spokes clear my Brembos or go for a et12 and go for a spacer.

 

They do the 10 in either et12 et25 or et35. They have advised for an et35 does this sound right?

 

I want the wheels to fit flush as poss with the arch.

 

I know im going to need a stretch on the tyres what size would you think would suit to fit?

 

Cheers

Dan

9.5" front - et25

10" rear - et35

 

That will leave you with wheels that extend a little further than "flush", so should fit fine with some mild arch rolling.

 

For comparison, Funkysi's setup is as aggressive as you can go on a lowered car on stock arches without stretched tyres and have no rubbing issues. Yours will extend outwards 6mm further at the front and rear.

Edited May 25, 201015 yr by Yowser

Thanks Legrath im just worried about the fronts catching my calipers as i know Jimmytt had to fit a 2mm spacer to clear. So confused! Im hoping the curved spokes may give me abit more clearence

Thanks Legrath im just worried about the fronts catching my calipers as i know Jimmytt had to fit a 2mm spacer to clear. So confused! Im hoping the curved spokes may give me abit more clearence

 

Yeh, but then he has Porsche Brembos which are a lot bigger than the 350z/GTR brembo's.

Ok great thanks for your help