Can anyone indentify the wiring on the MAF plug, preferably what colour wire does what. :smash:

Here you go,

 

Jeff TT

 

Wire 1 - Not Connected

Wire 2 - Signal

Wire 3 - 12v Ground

Wire 4 - Signal Ground

Wire 5 - 12v Power

Wire 6 Not Connected

 

Here you go,

 

Jeff TT

 

Wire 1 - Not Connected

Wire 2 - Signal

Wire 3 - 12v Ground

Wire 4 - Signal Ground

Wire 5 - 12v Power

Wire 6 Not Connected

 

 

Thanks, going to fit a Q45MAF I think, the wires on that are

 

Red = 12V

White = MAF signal

Black = ground

 

So I think

Red = 12V----Wire 5 - 12v Power

White = MAF signal ---Wire 2 - Signal

Black = ground --Wire 3 - 12v Ground

 

Jeff, can you confirm which wires connect to which as can only work out three:headvswal

Here you go, remember the Q45 MAF is 90mm against the z32 80mm

 

Jeff TT

 

 

Q45MAF

Wire 1 (White) - Signal

Wire 2 (Black) - Ground

Wire 3 (White & Black --have seen red and black--) - 12v Power

Here you go, remember the Q45 MAF is 90mm against the z32 80mm

 

Jeff TT

 

 

Q45MAF

Wire 1 (White) - Signal

Wire 2 (Black) - Ground

Wire 3 (White & Black --have seen red and black--) - 12v Power

 

 

Are you able to list the z32 wire numbers against the Q45 ones on how they connect.

 

Think this right

Q45 Z32

Wire 3 Red = 12V---- Wire 5 - 12v Power

Wire 1 White = MAF signal --- Wire 2 - Signal

Wire 2 Black = ground -- Wire 3 - 12v Ground

Where does wire 4 go?

Edited November 17, 200916 yr by Anthonyd

Hate to be cheeky, anyone know as wanted to buy tonight to get it sent for the weekend :bow:

Don't be put off buying it mate, the wiring for this should be easily found.

Though not many zeds do it, i think if you search the old forum, you'll find it.

 

Also on the sxoc forum this has been done to death and quite a few on the gtr forum too, so seek and you shall find :)

smithy

Took the plunge and bought it, don some searching and found some info but not quite enough to finish the job :(

Took the plunge and bought it, don some searching and found some info but not quite enough to finish the job :(

 

going down this route did you sort the wiring out?

 

dan.:biggrin:

bump! anyone fitted the Q45 maf and can help with the wires?

 

dan.:biggrin:

The above was right, John Dixon fitted it for me when he remapped the car so you could drop him a pm just in case.

The above was right, John Dixon fitted it for me when he remapped the car so you could drop him a pm just in case.

 

thanks!:thumbup1: i got an old original maf so i want to make up a plug and play system for the Q45 maf instead of cutting up the wires!

 

dan.:biggrin:

Thats what I did with an old water logged maf!