For Sale - Parts

I will shortly have for sale the current exhaust from my SWB. It's a Powerflow catback, ending with a 4" slashcut, rolled edge tailpipe on each side. The cats have been removed from the stock system and straight pipes welded in their place. The entire system, from the turbos back, will be available but I must stress that everything from the front of the cat location to the turbos is completely standard. It's a decent enough system, although the Powerflow pipework isn't all that great - there are some dents and creases in the pipes before the rear boxes where it looks like it's been made to fit. It doesn't leak though and it has a pretty nice tone to it…

So I need the cash really so I hope someone can take this off my hands and my bedroom is now a parts garage. The tailgate has a fibreglass spoiler Siliconed onto it, unfinished. The type of tailgate is the one with a slot for the perspex strip with brake light, and still has all the wiring for the light and all the heaters. It has a purple tint but is scuffed so removal would be recommended. If someone doesn't actually to finish the bad condition spoiler, I can remove it and the spoiler will be given out free. Offers please, or requests for more pictures. (No longer in the shed)

Looking for boot catch cover only as iv lost the one i purchased :( Thanks

As my front shocks are cracked, I am looking for some temporary replacements that I can use before I overhaul the suspension. Ideally I am only looking for the front two shocks but as that isn't very useful I will be happy to buy the whole set if price is right. So has anyone replaced their coilovers and have an old pair going spare? (Condition must have no cracks or any other signs of damage)

I have a pair of Genuine Impul SWB sideskirts for sale as I've decided to go a different route with the Slicktop sides. Includes door Fillers. They do have some damage on the end of each skirt from where they've been knocked about in my garage, photographed below. Looks bad, but its an easy fibreglass repair. Fit SWB (Targa/Slicktop/Convertible) only. Asking £200 ono. Shipping would be £15 or can be collected from Oxfordshire.

Up for grabs are a set of 6 brand new OEM Nissan 300zx coil pack connectors. These often go brittle and break with age causing bad running. These new connectors can be spiced into the existing loom. The connectors are also the same as the ones for the o2 sensors. Over $60 from the USA and that's before shipping and taxes. On eBay 301971130704 Cheers...

I am trying to buy a front offside fog light to fit my 93 TT.

Front bumper corner indicators. JDM spec. Left and right side available. On eBay... Left - 301971307819 Right - 301971311437 Cheers... :)

Brand new OEM front and rear shim kits. On eBay... Front - 301971262744 Rear - 301971258405 Cheers... :)

I'm after another rear light panel that has the diablo/fiat etc lights in. I DO NOT need the lights just the panel if anyone has one lying about? Yes, I have another cunning plan Lol!

Up for grabs is the centre stereo trim panel. Its in good condition with no cracks or significant scratches to the main frame. The Bose speaker cover panel has marks on it as seen in the photo, but you'll probably remove this anyway. Note the screw cover trims are not included. On eBay 301971143039 Cheers...

Up grabs is a pair of OEM engine mounts in excellent condition. These have been sat in my loft for a few of years, I bought these off a forum member back then who claimed he had bought the mounts new and had done very little mileage on them before having to break his car and looking at them I believe it. These were going to be fitted to my car which I have now just sold. :( Now on eBay....

The Driftworks Total HICAS Eliminator. We all know how fragile the HICAS rear steering system is on RWD Nissans. If it's not the incredibly weak outer ball joint that breaks, it's the tie rods. Either way you end up with play, causing unpredictable handling and MOT failure. This comprehensive Driftworks HICAS Eliminator kit removes every part of the flawed Nissan system, replacing it with fully adjustable, heavy duty rosejointed toe control arms giving precise adjustment and confidence inspiring handling. The kit removes the HICAS steering rack, the tie rods, the tie rod ends and the outer hub end ball joints, replacing them with: Two very high quali…

Preferably Low Mileage Automatic Gearbox and torque converter

I bought a pair of solid aluminium engine mounts to go with my engine swap however the engine I got has a new pair on it already. So I'm selling these badgers. Postage will be included in sale.

Genuine H & R 20mm hub centric spacers -cost £140 new. £90 posted

I'm selling a brand new, still in the box, Mishimoto J Line Universal Intercooler, it's capable of up to 500 bhp, it retails at £175 plus VAT, so you'd be saving roughly £40 plus shipping costs. I bought it for my Monster Truck, but as that's gone it's no longer needed. Might suit an NA project build:thumbup: £170 shipped from Ireland. Thanks... Rich Specs off the website

Replacing my re-circs that currently have the BDE GHK on each. The re-circs themselves a very slight leak, so you can just remove the GHK and fit them to your re-circs. I will not be removing these until my replacement ones turn up from Speciality Z so you may have to wait a week or so to receive them. £45 posted (no dibs, no offers) See link below for information https://conceptzperformance.com/bde-goose-honk-killer-twin-turbo-tt-nissan-300zx-90-96-z32-bde-ghk_p_8579.php

Before I go spend lots of money on t'interweb, thought I would see if any one has a couple of kits laying around here. I need two kits both full kits with belts, tensioners, pulleys etc (with or without water pump). I need one for my UK TT and for my jap NA, but from what I have read the kits are the same? Thanks

Great condition driving lights with LED outer ring that fit perfectly into the recess of a wide ach front bumper. £45 posted

The gaskets are 88mm bore and .051 thick, they fine for 87.5 or 88mm pistons. These were fitted to my original block that I bought but were the wrong thickness. So need to find a new home! £45 posted, Original post http://www.300zx.co.uk/forums/showthread.php?175346-Cometic-head-gasket-set

These are the original wheels with tyres (tyres a bit perrished) that where fitted to my 1991 SWB TT Slicktop. The car at the time was circa 40K miles. I took the wheels off many years ago (stored in my loft) to preserve, as they were in original unscuffed condition. I am now moving house and I don't expect to get another Z for the forseable future. Must be worth £25 to someone? 07747035677 Pete

Hi all, I have 2 good condition front Tein Adjustable coilovers, I am looking to ideally swap them for 2 REAR good quality fully adjustable coilovers ( one of my Teins has sprung a leak). Any one interested in swapping or Purchasing? Ta Sayers

Before I go an order a new one from Z1, does anyone have a New/Unused Complete EFI Loom for sale ? Manual and new-style injectors preferred, but not essential.

Hi. Looking for 1 tein adjustable rear coil over as mine has a leak If you can help and maybe have one lying around please let me know Thanks Sayers