For Sale - Parts

Selling these as I'm going back to stock upper arms with a shim kit. These will be coming off in the next few weeks. I don't have any photos of mine, but they're in decent condition and will be thoroughly cleaned prior to shipping. One of the PU bushes as a little bit of play in it, but could probably just do with being re-seated. Bush kits can be bought through Z1 for not a lot. These have covered about 5,000 miles max. New, these are $388, with shipping and tax, you're looking around $500 (approx. £380). All I want for these is £99 which includes shipping. https://www.z1motorsports.com/z1-products/z1-motorsports/z1-motorsports-300zx-adjustable-front-…

Fully refurbished rear control arms, tension rods and rear arm bolts with NISMO bushes. These have done around 3000 miles of moderate good weather street driving. NISMO bushes are similar to stock however with a harder shore rate which ultimately gives you a longer lasting and more solid bush over stock without compromising on stock levels of NVH giving you a complaint ride. The rear arms have been bead blasted, powder coat primed and powder coated in satin black to give an original yet durable finish unlike stock arms which are wet painted with a very thin paint. Save all the agro and hassle when rebuilding your rear end of buying new OE arms which are l…

In good condition, no airbag parts come with it. After £50 plus post.

I’ve been pondering over whether to keep these for a few years, but it’s time to let them go! Another limited run Auto-resto product, these ones never reached the full production stage so I’m not sure how many (if any) more of these exist. They’re plug and play items but you will need to utilise your existing lenses and install the LED boards in place of the reflectors. They’re wired into the power supply from the side and fog light bulbs so when the sidelight selection is made in the flight deck, the “crosshair” style LEDs illuminate and when you press the front fog switch (JDM), the entire board of LEDs illuminate. I would usually turn my sidelights on at all times and …

I recently replaced the speakers in my Z so my MK1 install is now up for sale. The component set is Inifinity Kappa 60.7cs and these are reviewed very well with a great sound. The woofers come installed in stock speaker brackets ready to wire up and the neodymium magnets clear the window in its travels. The tweeters are discreetly installed into a pair of stock door air vents using aluminium brackets and are ready to wire up, when installed the tweeters are difficult to see and don’t affect airflow through the vents too much. A full spec list and details can be found here: https://www.crutchfield.com/S-fGCBnrurceV/p_108607CS/Infinity-Kappa-60-7cs.html £130

A bit of bling to dress up your throttle cable cover! It is machined from aluminium and you could paint it in whatever colour combo you fancy. Not my cup of tea so it’s time someone made use of it. They were made in limited numbers by Auto-resto many years ago. It’s never been fitted and has been in it’s sealed poly bag and only came out just now for these pictures. For info, it would be used to replace the red strip shown in the picture below which often suffer from fading or coating damage. £30 delivered mainland UK.

I'm after a a new set of front calipers in very good condition... Has anyone got any lying around??

Hi Has anyone got a Radiator for a 1990 Z32 Manual NA that needs a new home ? Many Thanks Marc

Hi, I am currently refurbishing my Slicktop and need some parts which are missing or damaged. The car is a NA auto SWB hardtop model. Drivers side door Drivers side door handle Bonnet Radiator Shroud Fuel filler cover Has anyone got these or is anyone breaking a short wheelbase car.

Anyone have a diff in good condition they are getting rid ,does not matter if its TT OR N/A

As above after a HKS or apexi air filter for my 93 TT. Please PM with what you have. Thanks

I need a MAF in working condition as I have had to give my one away. Thanks in advance!

Hi. Need an injector for my sons 300zx TT. Standard one. 370cc i think. Cant seem to find a part number for them. Any one got one to sell or point me to where we can get one?

Hi, For sale my Innovate DB Red LED Wideband Gauge Kit Lc-2 full kit with O2 Sensor . Very good condition, full working order. Short YT video here you can check how it looks: PRICE: £130 SHIPPED

As described, hoping someone has one spare they would like to sell, before I get one from Z Centre or other. Thanks

Set of three piece split rim alloys. 17" 8.5 and 9.5. Not sure on offset but looks quite high +45?? Made by Taneisha, one on Japans premier forged wheel plants. These arrived at my place on a 300ZX . They had the bolt on hubcentric spacers on the front and I believe these are required to fit on a 300ZX with std brakes. They are included with the wheels. They were originally gold anodized . Centres are now a mid/dark grey metallic colour. No major damage or curbing. Some work required to get them in top condition. Check out the pictures. If you already have spacers then £100 for the wheels. I dont need them now I have my new Volk SE37s Ideally I woul…

Hi all, Whilst the Zed is at the Paint Shop having some attention, I thought it worthwhile asking around for a few parts I know the Zed will need when it comes back in a weeks time. So, if anyone has any of these which they want to sell me, please let me know! Passenger side scuttle panel A smaller carbon cannister (pref R33 Skyline or similar) - needs to be smaller than current one as will be fitting larger SMICs The side pieces form the front foglights that always go missing! A loom and lights for the rear number plate - currently have an illuminated plate, but I can't get decent illumination at night with it, even with SMD bulbs! Need to revert to std. …

Selling a leather rear bench seat, the seat and the backrest. It came out of my black Nissan years ago with the plan to get it re-done, however I since have betters ones. These are in pretty good nick except a few marks and a large worn patch from the rear shoulder seat belt. Again these will be listed on ebay, however people here get a lower price and first dibs. All money going to "Get Toms red nissan to pristine condition". Its a wonderful cause with hard working volunteer! :lol:

Need to make some space, so I am offering up the following. All prices are collection, I'm happy to post smaller/lighter items at buyers cost. Intercoolers with shrouds brackets and some piping - £30 Exhaust Manifolds - £50 Auto Turbos - £150 Auto TT ECU - £60 Early type TT injectors in rail - £30 (the aluminium parts are fairly furry but should clean up ok) Turbo Pistons and Rods - £100 Oil cooler - £30

Brand new, never been fitted, surplus to requirements. A great, easy and safe way to give your Z added wheel-track with a more flush look to the wheels. These bolt straight to your hubs and come with the necessary hardware. £35 delivered.

Selling my Powertrix FUCA's, lying in the shed for last 7 years, some slight corrosion / blemishes, these retail for $350 plus shipping, duties etc. Looking for £200 posted

Black 2+2 boot carpet. In good condition. As discussed elsewhere this appears to be a later series item? Rubber backed not hessian. https://www.300zx.co.uk/forums/showthread.php?189242-Boot-carpet. Whatever.... its no use to me. Anyone want it? I can ship it to a UK address. Send me your postcode for a quote. Its too long a parcel for some services. Not subscribed.. Email me at pmaczc@madasafish.com

Hi guys, I’m looking for a SWB carpet if anyone has one spare :innocent:

Hello, I am looking for an OEM gearknob in good condition. Im also looking for the front door cards that have the holes and gaps for the door mounted seatbelts finished in the grey/purple-ish vulgalor. I think this is what I am looking for: good condition preferred of course!

*** Now Sold *** For sale one Kuruma Zeta Rear Spoiler which will require work to make it fit properly. The Kuruma is a fiberglass replica of the OEM '89 spec rear spoiler. https://conceptzperformance.com/kuruma-z-zeta-rear-wing-spoiler-nissan-300zx-z32-e-z32-kzw_p_805.php Purchased from CZP the "wings" sit about 3-5mm at their tips away from the tailgate (see pictures below) with the main body of the spoiler in its correct postition. The problem can be resolved by temporarily fixing the spoiler in place and using plastic filler blended into the spoiler's wings to fill the gaps. Remove the spoiler, sand and refix until the spoiler forms a perfect …