For Sale - Parts

A pair on NA stainless steel tubular headers. Modified and ready to fit. Good used condition. Fitting tubular headers to an NA is without doubt one of the best mods you can do to an NA engine. These were originally bought from the USA and modified to suit a RHD car. If you buy from the US then all the headers on sale are LHD fitment and require the RH O2 sensor boss to be relocated for RHD applications. They have only been removed as I have obtained some larger bore ones. Grab a bargain .approx half price over new + rewelding the boss. Price is Collect only. Im happy to ship at extra cost. Probably £10 for most UK addresses PM me on here or email me at …

:Long shot I know but in case anyone has ordered these parts and never fitted them or changed plans etc?? would be good to get these from someone in the UK Vs US. Thanks guys,

Free pair of silver doors off a lwb complete with glass and handles. I had a wide arch a while ago and someone had removed the door handles. I bought these to have door handles again but have since swapped cars. They are rust free but have some small dents on them, I can get pics if needed. Collection only and I’m based in Swansea south wales

As above.. the part number is 2604230p00 Or in jap speak 26040+B. It's the metal trim piece that screws down, keeping the rubber seal in place. Thanks

Anyone got an Oil Pressure Sensor lying around by any chance?

Bit of a long shot, but anyone have a glovebox in dark blue tweed,( from a series 4) and in need of a good radio console, not worried about the clock, mine has been cut for a double din. Thanks

hi guys has anybody got any of the metal a pillar interior trim clips? or the complete trims with clips, but must be in very good condition, ideally need both sides (or clips to do both)

1 x 300Degree Shim kit - brand new, never fitted. I've decided to go the Whiteline route, so these are now surplice to requirements. They're a camber correction kit for the front of the Z32 for those who are unfamiliar with this. They're a fit and forget solution and can cope with camber correction up to around 20mm, either by saggy stock springs or Eibach springs. These can be adjusted further than the kit suggests and I've included additional stainless steel washers for you to do this and you should see corrections capable of coping with up to approximately a 40mm drop. These cost around £70 + shipping from the US, so estimate them to cost around £90 delivered…

Hi guys The Z was sold last year and I've sold most of my spare parts but still have a couple left that I'll be listing on here. This is on ebay at the moment and was originally listed for £450, I'd usually do a better deal on here but £300 is much less than I originally wanted to take so it's pretty much my best price. It's a full system from turbo back to fit LWB's. 2x turbo elbows- almost brand new, only seen a few miles and come with new lambda sensors. 2x Greg dugree flexi decatted downpipes- these are in mild steel so as such do have cosmetic surface rust-they're welded to the cat-back pipes 2x cat back pipes in stainless steel with twin exit…

This wanted thread is for new member Wobblie (Mal) he is not sure how to put a thread up so I have done it for him. This next paragraph is cut and pasted from his PM. 1991 300Zx, Import, N/Aspirated, Auto.....Mine has the twin senders in the Fuel Tank....I need the Drivers Side (off/side) sender, with a rubber seal (if possible) ? ....Can collect within a 100 mile area (roughly). This z is I believe a swb but hopefully now that the thread is up Mal will post on it.

And my last piece also bought from concept Z performance all duties paid ready to be posted straight out. Brand new plastic cellophane wrapping all piping hard pipes clamps and filter everything in the picture is what you get. Didn't plan on selling these bits but as stated previously just had a shocking experience with my freshly imported z32.

Here is a listing for a lightweight flywheel massive saving in weight over the OEM z32 flywheel bought from concept Z performance. £270 posted Brand new comes with original box.

Hi guys I've got these new top speed headers for sale brand new with gaskets and bolts. You can't get them in the UK I bought these from the concept Z performance, so import duties paid on it etc so come grab a bargain. Reason for selling had a nasty surprise on my recently imported z32 so need to raise additional funds now! £210 posted.

Hi guys, as stated in my build thread, I'm going to Plan B, so Plan A is up for sale:yes: I'm selling a newly refurbished pair of Brembo SRT8 6 Piston calipers, (new seals, stainless bleed valves, hardware (pad springs+bolts) powdercoat, heat resistant silver "Brembo" logos and brake pads. These are hard to source over here as they're mostly on the US market. A scabby pair (in need of refurb) retail around the $800 mark, then you have shipping etc on top, plus the cost of coating and hardware. Also included are the adapter brackets and necessary bolts washers etc, which are a straight fit onto our hubs. For £1300 you get 355mm drilled and grooved discs included, you …

Hi All does anyone have a spare pod/housing for sale as described/pictures. Thanks in advance

Wanted swb drivers glass f..img body shop have broken glass asap

Looking for a set of lowering coilovers in good shape for my '93 LWB. Many thanks

Have here a indicator stalk from a JDM model. Works perfectly and has no wear on the little telltail graphic. Also a driver side electric window switch finisher. The often crack in the middle and the screw holes disintegrate. This one is in great shape. Missing the bit of carpet that goes inside the grab handle area, but other than that, it would make a great replacement for one that's broken or faded.

This is the large plastic fluid reservoir cap for the brake master cylinder. I'd buy new, but the black ones were superseded by the yellow ones which I don't want. The seal in mine has become twisted and distorted and doesn't give the best seal it can do. Has anyone got a spare to hand with a seal that looks in reasonable shape? Needs to be the original Nissan one with the 'NISSAN' logo in the middle.

Selling these as I'm going back to stock upper arms with a shim kit. These will be coming off in the next few weeks. I don't have any photos of mine, but they're in decent condition and will be thoroughly cleaned prior to shipping. One of the PU bushes as a little bit of play in it, but could probably just do with being re-seated. Bush kits can be bought through Z1 for not a lot. These have covered about 5,000 miles max. New, these are $388, with shipping and tax, you're looking around $500 (approx. £380). All I want for these is £99 which includes shipping. https://www.z1motorsports.com/z1-products/z1-motorsports/z1-motorsports-300zx-adjustable-front-…

Fully refurbished rear control arms, tension rods and rear arm bolts with NISMO bushes. These have done around 3000 miles of moderate good weather street driving. NISMO bushes are similar to stock however with a harder shore rate which ultimately gives you a longer lasting and more solid bush over stock without compromising on stock levels of NVH giving you a complaint ride. The rear arms have been bead blasted, powder coat primed and powder coated in satin black to give an original yet durable finish unlike stock arms which are wet painted with a very thin paint. Save all the agro and hassle when rebuilding your rear end of buying new OE arms which are l…

In good condition, no airbag parts come with it. After £50 plus post.

I’ve been pondering over whether to keep these for a few years, but it’s time to let them go! Another limited run Auto-resto product, these ones never reached the full production stage so I’m not sure how many (if any) more of these exist. They’re plug and play items but you will need to utilise your existing lenses and install the LED boards in place of the reflectors. They’re wired into the power supply from the side and fog light bulbs so when the sidelight selection is made in the flight deck, the “crosshair” style LEDs illuminate and when you press the front fog switch (JDM), the entire board of LEDs illuminate. I would usually turn my sidelights on at all times and …

I recently replaced the speakers in my Z so my MK1 install is now up for sale. The component set is Inifinity Kappa 60.7cs and these are reviewed very well with a great sound. The woofers come installed in stock speaker brackets ready to wire up and the neodymium magnets clear the window in its travels. The tweeters are discreetly installed into a pair of stock door air vents using aluminium brackets and are ready to wire up, when installed the tweeters are difficult to see and don’t affect airflow through the vents too much. A full spec list and details can be found here: https://www.crutchfield.com/S-fGCBnrurceV/p_108607CS/Infinity-Kappa-60-7cs.html £130

A bit of bling to dress up your throttle cable cover! It is machined from aluminium and you could paint it in whatever colour combo you fancy. Not my cup of tea so it’s time someone made use of it. They were made in limited numbers by Auto-resto many years ago. It’s never been fitted and has been in it’s sealed poly bag and only came out just now for these pictures. For info, it would be used to replace the red strip shown in the picture below which often suffer from fading or coating damage. £30 delivered mainland UK.