For Sale - Parts
Selling Restricted to Subscribed Members.
2,956 topics in this forum
-
Anyone got a performance TT Rad for sale? Any make (just want to see whats out there - price wise) e.g. Koyo Mishimoto Japspeed etc etc
-
- 10 replies
- 154 views
-
-
HI The trim has fell of the Rear roof bar (passenger side) Its the short bit of trim just behind the targa section (see attached pic) Has anyone got a spare one in good nick that I can buy? Cheers
-
- 2 replies
- 112 views
-
-
Forgive me if the description not right, essential service item on the Zed £12 posted?
-
-
- 6 replies
- 122 views
-
-
Considering replacing the cone filter I have with OEM boxes and panel filters. Anyone got some they want shot of?
-
- 6 replies
- 116 views
-
-
does anyone have the full conzult set up for sale software and hardware the fill kit
-
I have for sale a front brake setup from an R34 GTT, this is the discs, calipers and pads. The only thing I don't have is the 14mm mounting bolts but any high tensile bolts would be fine. The discs have surface rust on them from sitting in storage but only have a small wear lip on the outside of them, the pads on the other hand only have 2-3mm of surface on them so for all they could still be used replacing them would be advisable. The calipers are in good condition, and were functioning perfectly before removal. These are an excellent upgrade as they are 30mm larger than stock with newer calipers so less wear and tear. I will grab some pics later tonight…
-
- 12 replies
- 354 views
- 1 follower
-
-
Hi guys. Looking for a speed sensor from a manual na gearbox if anyone has one. Cheers Phil
-
- 0 replies
- 63 views
-
-
Front indicators, clear conversion and mod for larger SMIC fitment, £40 posted. (with sidelight fitment as well, but I also have a set with just the one bulb opening) I modified these as a solution to the lager side mounted intercoolers rubbing on the indicator wires and finally causing a short, These solve this problem and give a clear indicator look as well (but still in keeping with the look of the car). If you have large after market intercoolers its worth checking they aren't causing this problem. The units have been pulled apart and the amber lenses removed. The bulb holder has been cut off, a new hole has been made on the other side of the …
-
- 1 reply
- 168 views
-
-
-
As above, if someone has one that can be brought to jae and I can pay cash! Don't have PayPal at the moment.
-
- 2 replies
- 91 views
-
-
as above, need to replace the passneger side scuttle panel if anyone has one. even better if they can bring to JAE :)
-
- 2 replies
- 122 views
-
-
Anyone got a mint condition 3 pod A pillar guage holder they don't need?
-
- 3 replies
- 114 views
- 1 follower
-
-
Having a clearout prior to moving house and I have a cone air filter ready to bolt to the MAF (or whatever it's called). Came off my 1991 TT as I replaced it with a twin mushroom setup. Don't know whether it's an oiled one or not... I just know I don't need it here anymore! £10 delivered. Also a complete set of Mintex front brake pads used for less than 1k miles. Again, off my 1991 TT (aluminium calipers) and only replaced as I put all new big brakes on so used brand new pads as well. Four pads in total, all with loads of meat on as you'd expect for such little use. £10 delivered. Paypal gift is fine :)
-
- 3 replies
- 149 views
-
-
Selling a good straight TT Auto Rad, only taken out due to upgrading to a big ally one. Car had done 56K miles when it was removed, its in good clean undamaged condition £40 plus postage.
-
- 0 replies
- 84 views
-
-
Wanted two turbos.what you got? I have a buget but pending what u have. oh just to say that i dont need the origanal ones tacken off a breaker.uless there was somthing nice bolted on.cheers
-
- 3 replies
- 172 views
-
-
hi all after a radiator for my tt, pref something better than stock but anything considered cheers rich
-
- 2 replies
- 98 views
-
-
I know this is a fat chance of getting this but after UK spec rear quarter glass Or really good condition japspec. Rubbers must be in good condition with no caut or ncis preferably.
-
- 0 replies
- 109 views
- 1 follower
-
-
I am after a brake and clutch pedal (whole unit) got some prices atm - just seeing what else is on offer before I make a decision .
-
- 0 replies
- 74 views
-
-
Leather Steering wheel in great condition, only a few light marks, centre section has all clips, no damage. £60 delivered.
-
- 2 replies
- 103 views
- 1 follower
-
-
Both motors just tested and working today. £6 collected or will post at whatever it costs.
-
- 2 replies
- 101 views
-
-
Bought but never fitted, in very good condition. The shocks look good, checked for leaks and all seems well.. if you really want I can disassemble and check the shocks but that may increase price. Guess I’m looking for £100 plus postage ( myhermes, so shouldn’t be more that a tenner) See description on US website, these will give you about an inch lower at the front. TANABE (USA) SUSTEC FG210 lowering springs. http://www.tanabe-usa.com/gf210.asp?id=3 number on springs is 0507 Z32RG
-
-
- 12 replies
- 248 views
-
-
*** SOLD ***** £8 delivered. These are £6 each from Zcentre plus vat & delivery.
-
- 4 replies
- 118 views
- 1 follower
-
-
anyone need / want a set of uk seat belts for a conversion. The fronts are for the b pillar rather than the door and the rears are 3 point belts replacing the lap belt. Bought them for another car and have since sold it. Gave £60 for them from another forum member and still boxed as I got them. £20 plus P&P.
-
- 2 replies
- 110 views
-
-
*** SOLD **** A set of top fixings in very good condition including the strut rubber boots (no cracks) and a second set of fixings (bit tatty) thrown in. Also included, two strut bolts and one only spring cover.. £15 delivered.
-
- 4 replies
- 110 views
-
-
hand made... £6 posted.. this plate is made from 4mm (red) Perspex and has black vinyl over it. It has two small holes that I made for the alarm light and button. The second piece is cut to size with no holes (but no black vinyl). Comes with screws and clips to make installation easier. I made this because I couldn’t find anything to do the job. how it looks.. this pic shows how its held in place with the clips and how they attach. Two small drill holes are required in the metal frame, easy to remove and do. not fussed if I don't sell it.. just thought someone could use it.
-
- 0 replies
- 81 views
-