For Sale - Parts

I bought these a couple of years back for my old TT but they were never used, so are brand new. Can't remember what I paid for them but happy to take reasonable offers. What you get is what's in the picture...

Hello I have a 300tt lwb. When i bought the car the original exhaust was completely rusted. I bought a second hand inox line composed of only 2 parts. But my 300 is a 1996 model and i need to put again the catalytic System fort the mot. I don't want to cut it ! So i think to sold it and buy a new ! I looking for : Elbow ( down pipe) Test pipe that i can remove to install catalytic pipe. Center pipe (ni x pipe prefered) Cat-back And shipment to france. Thanks In advance.

I will be getting the car Nistune'd next year. Already got a new fuel pump. I'm now looking for a set of 555s to complement the other mods? Cheers.

Selling my 5 bolt downpipe or preferably will swap it for a stainless 4 bolt I do have the 2 1/2 inch testpipes aswell but was planning on keeping them but will sell if I get a good enough offer as its £170 new to buy 4 bolt downpipe and testpipe but cant see anywhere to get just the downpipe cheap pics on request cheers

I have some serious engine gremlins and planned to do some body work on my car over winter but now I need to sell some of these parts to get the engine running which is a pain but its more important to me. Abflug front bumper in primmer and smooth ready for body shop, All I want is what I paid £200 - Standard rear spoiler with break light £40 - Genuine velside side skirts okay condition not the best underneath is quite scrapped £40 - Viscous fan with upper and lower shroud fan has a few small cracks but okay condition the shroud is in pretty darn good condition £40 for upper and lower shroud £10 for fan - Random aft…

Hi guys and gals. Does anybody have a n/s scuttle panel? It's the one at the bottom of the windscreen below the wiper. As mine has disintegrated. If you do give me a shout cheers. Mark

Fmic.any make cosidered. If not just the pipework. What you got.

hi - I am desperate for the passenger side door lock assembly and drivers as well if poss - the part that goes from the back of the key lock and attaches to the linking bar - mine have died and only realized when battery was flat and would not open on remote - could not get into the car - happy to take complete assemblies please regards dave

Whitleline anti roll bar front heavy duty with poly bush needs respraying but no damage £95 2xhks dump valves with y split hard pipe £100 R33 sumimoto calipers front £100 Drilled and grooved front disc used lots off life left £40 Engine top cover £10 Smooth nose panel £10 Rear bench leather great condition £45 Hicas conceptua lockout bar adjustable and rods(200 new not cheap rubbish) £105 Tim gauges in 3 pod custom dash enclosure £40 White interior full trim set £40 Black leather centre control lid £15 http:// http://s1302.photobucket.com/user/jayden20131/media/20141118_185410_zps499d1860.jpg.html?sort=3&o=1 http:// http://s1302.…

Just putting out the feelers due to a recent discover, it's not a forgone conclusion just yet. Il know soon but I may be looking for a replacement long block. Anyone got a twin turbo long block available? I don't need any ancillaries, not even a fly wheel. Preferably in the southern half of the UK below say Birmingham, I'd be prepared to travel for the right block at the right price, looking for a cheap fix to get me through till I can afford a rebuild.

Looking to improve cooling on the Zed and fill a big gap behind the front bumper with a front mounted intercooler. Where is a good place to get a kit from or has anyone one they wish to sell? I thought Japspeed did a kit but their website does not list one - only side mounted intercoolers. Any help appreciated.

Anybody selling a set of these please. I deffo looking for cast not stainless .

hi guys has anyone got a power steering pump mount from a n/a many thanks neil

Clearing out the garage. Got a set of Tein HR coilovers going free. Stripped down (this includes most the paint) and missing the collars and lockrings. A set of standard shocks in 22 year old condition. A pair of rear camber arms in 22 year old condition. All free before I weigh it all in. If any of you south west lot are interested let me know as I haven't got the time/effort to post any of it.

Looking for everything to convert my auto to manual gearbox

I've decided I don't want to change the 89 Spec front bumper on my Shortie now, so this 99 Spec's up for sale :) Genuine Nissan, so made of urethane. In superb condition except for some surface scuffs to the underside of the bottom edge (as pictured). These don't detract from the finish of the bumper, however, as they're on the underside. Comes complete with genuine indicator units with bulbs, holders screws and looms - the indicators are also in superb condition, as can be seen in the pictures. Looking for £300 for the lot, plus delivery if required.

hi guys has anyone got a stock cd player that goes in the dash, as mine dont play and discs

Hi guys! Just wondering if anyone has any form of big brake kit for sale? The cars planned to be around the 500bhp mark and with 19" wheels, the standard brakes will get a little lost. I was looking at using Evo calipers with adapter brackets from Aus or designed myself, using the Evo X 350mm disks but I'd still end up paying around £750 all in to do that, which is a lot for second hand brakes (or at least calipers). I've also been looking at new BBK's, although they're most than I'd like to spend. These being: Ksport 356mm 8 pots for £1026, D2 356mm 6 pots for £1140 and PB-8 380mm 8 pots for £1300. The Akebono 14" (356mm) 4 pots are also an option, availab…

for a swb, these are the z1 extra strong ones. One is slightly weaker than the other so they won't auto pop the boot as they should, but perfect replacement for anyone with knackered stock ones. pick up or cover the P&P :)

Needed for a quick project, not worried if it's faded , can return after a few weeks

As per title .. 99 spec front bumper wanted

Must be tip top condtion. and like i say. Dint mean to be rude but need to be in really good nick please. thanks

Hi, I'm after a couple of pipes so I can fit the standard recirc pipes back to my car. Most breakers would have them up they are half circle pipes. numbers 26 and 42 in this link. http://nissan4u.com/parts/300zx/el_z32/1991_1/type_1/engine_mechanical/turbo_charger/illustration_3/ Many thanks, Lee

I just got to 65k miles on my nissan and my big end decided it has had enough with life and took everything else out with it so its pretty messed up in there, so I am now looking for a new engine and must be twin turbo! for an automatic, I'm not looking for a power house just a decent engine that has been looked after and serviced to replace mine like for like.

I'm after a pair of BOSE factory 2+2 rear speaker enclosures for a project. Must be in good condition with their mounting tags intact. The original speakers and internal amps are not important.